Skip to content

OM Series Flow Meter Pulse Out | 1/8" - 3/8" (1 L/hr - 550 L/hr)

SKU OM004A511-211
Availability:
In stock
Availability:
In stock
Availability:
In stock
Availability:
Manufactured Item - Typical Lead Time 5 days
Availability:
In stock
Availability:
Manufactured Item - Typical Lead Time 5 days
Original price $728.20 - Original price $889.90
Original price
$854.70
$728.20 - $889.90
Current price $854.70

The FLOMEC® Small Capacity OM Series Oval Gear meters are a versatile solution for precision flow measurement across various applications. This flow meter is specifically designed to meet the demands of industries that require accurate and reliable measurements. With a wide flow range capability from 1 L/hr to 550 L/hr, it proves to be adaptable for applications such as Fuel Additive Injection, Fuel Consumption and Additive Injection

Designed to measure high-viscosity fluids with ease, this flow meter is ideal for applications where consistent and precise measurements are crucial. Its performance remains unparalleled, even in challenging fluid environments.

The OM Series Flow Meter Pulse Out excels in accuracy, boasting a remarkable ±1.0% reading accuracy. This high level of precision ensures that every measurement is reliable, contributing to the efficiency and success of your processes. Its versatile pulse-out feature provides seamless integration into various control systems, enabling real-time data transmission for enhanced monitoring and control.

Our small-capacity flow meters for fuels and oils are constructed with aluminium body material, stainless steel rotors (PPS in the 3/8 in.), and Viton O-rings.

    OM Series Oval Gear flow meters are perfect for measuring small volumes of a thick or non-conductive liquids.

    Applications
    • Fuel additive injection
    • Fuel consumption measurements
    • Diesel injector/pump test equipment
    • Monitoring of oil or grease lubricants
    Features
    • Accuracy of ± 1.0% of reading
    • Repeatability is typically ± 0.03% of reading
    • Flows from 1 L/hr. to 550L/hr.
    • Sizes 1/8” – 3/8” (4mm–10mm) Pipe Sizes
    • High accuracy and repeatability; direct volumetric reading
    • No requirement for flow conditioning (straight pipe runs)
    • Only two moving parts means less maintenance and better reliability
    • Factory calibrated
    Specifications
    • Technology: Oval Gear
    • Flow Range: 1 - 550 L/hr (Size Dependant)
    • Accuracy: ± 1%
    • Repeatability: ± 0.03%
    • Pressure Rating: 15 bar (220 psi)
    • Operating Temperature Range: -40° C - 150° C (max 80°C with display)
    Size: 1/8 in. (1 - 36 L/hr)
    Connection: BSP
    Display Required: No Display - Pulse Out Only

    FREQUENTLY ASKED QUESTIONS

    How often do we need to calibrate our OM Series flow meter?

    There is no standard recommendation. It will depend on how often it is used, the criticality of the measurement, and how much you are willing to spend on keeping the instrument in calibration. The common best practice approach is to choose a nominal re-calibration period and then check the re-calibration against the original calibration report to see how much it has drifted during that period. If it has changed more than what deems acceptable, you may shorten the frequency. If the change is a lot less, you may choose to extend it.

    If we ordered a meter with a meter mount display, can we take out the display to mount it remotely?

    Yes, the display can be remotely mounted. You can contact us or our distributor in your area on what parts are needed for this conversion.

    Can we have our meter recalibrated?

    Yes, we can cater to recalibration requests of varying requirements, including multipoint calibrations. Contact us for more information.

    Can we install our meter vertically?

    Yes, the meter can be installed vertically but the rotor shafts must be in horizontal plane and the liquid should travel from bottom to top through the meter. Failure to mount your meter in the correct orientation will cause the weight of the rotors to bear down on the thrust bearings. The short term effects of incorrect mounting orientation will be a loss in accuracy, with long term effects ranging from reduced lifespan to fairly rapid catastrophic damage.

    Do you have CAD files or drawings available for your these meters?

    Yes, we have a full list of CAD files and drawings available here. If you have any other requirements for specifying the OM Series, please feel free to contact us so we can assist you.

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare