FLOMEC® EB Batch Controller
The FLOMEC® EB Ecobatch is a fully programmable high speed batch controller specifically designed to operate with common pulse producing flowmeters such as positive displacement, turbine, mass, vortex or magnetic style.
The instrument displays batch value, batch progress & cumulative total in engineering units as programmed by the user, it also logs the total number of batches performed and total volume dispensed.
Ecobatch scrolls messages to prompt the user at each stage of operation. Batch limiting and no-flow detection are “safeguards” against erroneously high batch entries, loss of the flow input signal or control valve or pump failure.
Two independent outputs can be programmed to provide stepped control at the start and/or end of each batch. DC powered models have two solid state control outputs, DIN models can be AC or DC powered and have two single pole double throw (SPDT) control 5A relays.
An Automatic Overrun Compensation feature corrects for any batch errors attributed to slow closing valves or flow rate variations.
As many as 9 Ecobatch controllers may be networked together, typical applications are where one liquid is being dispensed to a number of outlets or a number of different liquids are being batched via one common flowmeter. Ecobatch will also take an “inhibit start” signal from other control or plant equipment.
Simple PIN protected flow chart programming with English prompts guide you through the programming routine, greatly reducing the need to refer to the instruction manual.
- Large 8 digit batch & cumulative
- total LCD
- Robust IP66/67 universal mount or
- DIN panel mount version
- Simple programming
- PIN protected programming
- Scaleable flow inputs
- Two stage control
- Automatic overrun compensation
- Missing pulse (no flow) alarm
- Maximum batch size limiting
- Non volatile memory
- Multiple batcher interlock function
- Remote Run, Stop, batch set, etc
- Batching systems
- Self powered totalisers
- Flow rate totalisers